Close Menu
    Class 11 Chemistry

    NCERT Solution for Class 11 Chemistry Chapter 1 – Some Basic Concept of Chemistry

    AdminBy Updated:21 Mins Read

    Subtopics of NCERT Solutions for Class 11 Chemistry Chapter 1 Some Basic Concepts of Chemistry

    1. Importance of Chemistry
    2. Nature of Matter
    3. Properties of Matter and Their Measurement
    4. The International System of Units (SI)
    5. Mass and Weight
    6. Uncertainty in Measurement
    7. Scientific Notation
    8. Significant Figures
    9. Dimensional Analysis
    10. Laws of Chemical Combinations
    11. Law of Conservation Of Mass
    12. Law of Definite Proportions
    13. Law of Multiple Proportions
    14. Gay Lussac’s Law of Gaseous Volumes
    15. Avogadro’s Law
    16. Dalton’s Atomic Theory
    17. Atomic and Molecular Masses
    18. Atomic Mass
    19. Average Atomic Mass
    20. Molecular Mass
    21. Formula Mass
    22. Mole Concept and Molar Masses
    23. Percentage Composition
    24. Empirical Formula for Molecular Formula
    25. Stoichiometry and Stoichiometric Calculations
    26. Limiting Reagent
    27. Reactions in Solutions

    Exercise : Solutions of Questions on Page Number : 22
    Q1 :Calculate the molecular mass of the following:
    (i) H2O (ii) CO2 (iii) CH4
    Answer :|
    (i) H2O:
    The molecular mass of water, H2O
    = (2 x Atomic mass of hydrogen) + (1 x Atomic mass of oxygen)
    = [2(1.0084) + 1(16.00 u)]
    = 2.016 u + 16.00 u
    = 18.016
    = 18.02 u
    (ii) CO2:
    The molecular mass of carbon dioxide, CO2
    = (1 x Atomic mass of carbon) + (2 x Atomic mass of oxygen)
    = [1(12.011 u) + 2 (16.00 u)]
    = 12.011 u + 32.00 u
    = 44.01 u
    (iii) CH4:
    The molecular mass of methane, CH4
    =(1 x Atomic mass of carbon) + (4 x Atomic mass of hydrogen)
    = [1(12.011 u) + 4 (1.008 u)]
    = 12.011 u + 4.032 u
    = 16.043 u

    Q2 :Calculate the mass percent of different elements present in sodium sulphate (Na2SO4).
    Answer :
    The molecular formula of sodium sulphate is Na2SO4
    Molar mass of Na2SO4 = [(2 × 23.0) + (32.066) + 4 (16.00)]
    = 142.066 g
    Mass percent of an element 
    ∴ Mass percent of sodium: 
    Mass percent of sulphur: 
    Mass percent of oxygen:

    Q3 :Determine the empirical formula of an oxide of iron which has 69.9% iron and 30.1% dioxygen by mass.
    Answer :
    % of iron by mass = 69.9 % [Given]
    % of oxygen by mass = 30.1 % [Given]
    Relative moles of iron in iron oxide: 
    Relative moles of oxygen in iron oxide: 
    Simplest molar ratio of iron to oxygen:
    = 1.25: 1.88
    = 1: 1.5
    2: 3
    ∴ The empirical formula of the iron oxide is Fe2O3.

    Q4 :Calculate the amount of carbon dioxide that could be produced when
    (i) 1 mole of carbon is burnt in air.
    (ii) 1 mole of carbon is burnt in 16 g of dioxygen.
    (iii) 2 moles of carbon are burnt in 16 g of dioxygen.
    Answer :
    The balanced reaction of combustion of carbon can be written as:

    (i) As per the balanced equation, 1 mole of carbon burns in 1 mole of dioxygen (air) to produce1 mole of carbon dioxide.
    (ii) According to the question, only 16 g of dioxygen is available. Hence, it will react with 0.5 mole of carbon to give 22 g of carbon dioxide. Hence, it is a limiting reactant.
    (iii) According to the question, only 16 g of dioxygen is available. It is a limiting reactant. Thus, 16 g of dioxygen can combine with only 0.5 mole of carbon to give 22 g of carbon dioxide.

    Q5 :Calculate the mass of sodium acetate (CH3COONa) required to make 500 mL of 0.375 molar aqueous solution. Molar mass of sodium acetate is 82.0245 g mol-1
    Answer :
    0.375 M aqueous solution of sodium acetate
    ≡ 1000 mL of solution containing 0.375 moles of sodium acetate
    ∴Number of moles of sodium acetate in 500 mL

    Molar mass of sodium acetate = 82.0245 g mole -1 (Given)
    ∴ Required mass of sodium acetate = (82.0245 g mol-1) (0.1875 mole)
    = 15.38 g

    Q6 :Calculate the concentration of nitric acid in moles per litre in a sample which has a density, 1.41 g mL-1 and the mass per cent of nitric acid in it being 69%.
    Answer :
    Mass percent of nitric acid in the sample = 69 % [Given]
    Thus, 100 g of nitric acid contains 69 g of nitric acid by mass.
    Molar mass of nitric acid (HNO3)
    = {1 + 14 + 3(16)} g mol–1
    = 1 + 14 + 48
    = 63 g mol–1
    ∴ Number of moles in 69 g of HNO3

    Volume of 100g of nitric acid solution

    Concentration of nitric acid

    ∴Concentration of nitric acid = 15.44 mol/L

    Q7 :How much copper can be obtained from 100 g of copper sulphate (CuSO4)?
    Answer :
    1 mole of CuSO4 contains 1 mole of copper.
    Molar mass of CuSO4 = (63.5) + (32.00) + 4(16.00)
    = 63.5 + 32.00 + 64.00
    = 159.5 g
    159.5 g of CuSO4 contains 63.5 g of copper.
    ⇒ 100 g of CuSO4 will contain  of copper.
    Amount of copper that can be obtained from 100 g CuSO4 
    = 39.81 g

    Q8 :Determine the molecular formula of an oxide of iron in which the mass per cent of iron and oxygen are 69.9 and 30.1 respectively. Given that the molar mass of the oxide is 159.69 g mol-1.
    Answer :
    Mass percent of iron (Fe) = 69.9% (Given)
    Mass percent of oxygen (O) = 30.1% (Given)
    Number of moles of iron present in the oxide 
    = 1.25
    Number of moles of oxygen present in the oxide 
    = 1.88
    Ratio of iron to oxygen in the oxide,

    = 1 : 1.5
    = 2 : 3
    The empirical formula of the oxide is Fe2O3.
    Empirical formula mass of Fe2O3 = [2(55.85) + 3(16.00)] g
    Molar mass of Fe2O3 = 159.69 g

    Molecular formula of a compound is obtained by multiplying the empirical formula with n.
    Thus, the empirical formula of the given oxide is Fe2O3 and n is 1.
    Hence, the molecular formula of the oxide is Fe2O3.

    Q9 :Calculate the atomic mass (average) of chlorine using the following data:

    % Natural Abundance Molar Mass
    35Cl 75.77 34.9689
    37Cl 24.23 36.9659

    Answer :
    The average atomic mass of chlorine

    = 26.4959 + 8.9568
    = 35.4527 u
    The average atomic mass of chlorine = 35.4527 u

    Q10 :In three moles of ethane (C2H6), calculate the following:
    (i) Number of moles of carbon atoms.
    (ii) Number of moles of hydrogen atoms.
    (iii) Number of molecules of ethane.
    Answer :
    (i) 1 mole of C2H6 contains 2 moles of carbon atoms.
    Number of moles of carbon atoms in 3 moles of C2H6
    = 2 × 3 = 6
    (ii) 1 mole of C2H6 contains 6 moles of hydrogen atoms.
    Number of moles of carbon atoms in 3 moles of C2H6
    = 3 × 6 = 18
    (iii) 1 mole of C2H6 contains 6.023 × 1023 molecules of ethane.
    Number of molecules in 3 moles of C2H6
    = 3 × 6.023 × 1023 = 18.069 × 1023

    Q11 :If the density of methanol is 0.793 kg L-1, what is its volume needed for making 2.5 L of its 0.25 M solution?
    Answer :
    Molar mass of methanol (CH3OH) = (1 × 12) + (4 × 1) + (1 × 16)
    = 32 g mol-1
    = 0.032 kg mol-1
    Molarity of methanol solution 
    = 24.78 mol L-1
    (Since density is mass per unit volume)
    Applying,
    M1V1 = M2V2
    (Given solution) (Solution to be prepared)
    (24.78 mol L-1) V1 = (2.5 L) (0.25 mol L-1)
    V1 = 0.0252 L
    V1 = 25.22 mL

    Q12 :Pressure is determined as force per unit area of the surface. The SI unit of pressure, Pascal is as shown below:
    1Pa = 1N m-2
    If mass of air at sea level is 1034 g cm-2, calculate the pressure in Pascal.
    Answer :
    Pressure is defined as force acting per unit area of the surface.

    = 1.01332 × 105 kg m-1s-2
    We know,
    1 N = 1 kg ms-2
    Then,
    1 Pa = 1 Nm-2 = 1 kg m-2s-2
    1 Pa = 1 kg m-1s-2
    Pressure = 1.01332 × 105 Pa

    Q13 :What is the SI unit of mass? How is it defined?
    Answer :
    The SI unit of mass is kilogram (kg). 1 Kilogram is defined as the mass equal to the mass of the international prototype of kilogram.

    Q14 :Match the following prefixes with their multiples:

    Prefixes Multiples
    (i) micro 106
    (ii) deca 109
    (iii) mega 10-6
    (iv) giga 10-15
    (v) femto 10

    Answer :

    Prefixes Multiples
    (i) micro 10-6
    (ii) deca 10
    (iii) mega 106
    (iv) giga 109
    (v) femto 10-15

     

    Q15 :What do you mean by significant figures?
    Answer :
    Significant figures are those meaningful digits that are known with certainty.
    They indicate uncertainty in an experiment or calculated value. For example, if 15.6 mL is the result of an experiment, then 15 is certain while 6 is uncertain, and the total number of significant figures are 3.
    Hence, significant figures are defined as the total number of digits in a number including the last digit that represents the uncertainty of the result.

    Q16 :A sample of drinking water was found to be severely contaminated with chloroform, CHCl3, supposed to be carcinogenic in nature. The level of contamination was 15 ppm (by mass).
    (i) Express this in percent by mass.
    (ii) Determine the molality of chloroform in the water sample.
    Answer :
    (i) 1 ppm is equivalent to 1 part out of 1 million (106) parts.
    Mass percent of 15 ppm chloroform in water

    (ii) 100 g of the sample contains 1.5 × 10-3g of CHCl3.
    ⇒ 1000 g of the sample contains 1.5 × 10-2g of CHCl3.
    Molality of chloroform in water

    Molar mass of CHCl3= 12.00 + 1.00 + 3(35.5)
    = 119.5 g mol-1
    Molality of chloroform in water = 0.0125 × 10-2m
    = 1.25 × 10-4m

    Q17 :Express the following in the scientific notation:
    (i) 0.0048
    (ii) 234,000
    (iii) 8008
    (iv) 500.0
    (v) 6.0012
    Answer :
    (i) 0.0048 = 4.8 x 10-3
    (ii) 234, 000 = 2.34 x 105
    (iii) 8008 = 8.008 x 103
    (iv) 500.0 = 5.000 x 102
    (v) 6.0012 = 6.0012

    Q18 :How many significant figures are present in the following?
    (i) 0.0025
    (ii) 208
    (iii) 5005
    (iv) 126,000
    (v) 500.0
    (vi) 2.0034
    Answer :
    (i) 0.0025
    There are 2 significant figures.
    (ii) 208
    There are 3 significant figures.
    (iii) 5005
    There are 4 significant figures.
    (iv) 126,000
    There are 3 significant figures.
    (v) 500.0
    There are 4 significant figures.
    (vi) 2.0034
    There are 5 significant figures.

    Q19 :Round up the following upto three significant figures:
    (i) 34.216
    (ii) 10.4107
    (iii) 0.04597
    (iv) 2808
    Answer :
    (i) 34.2
    (ii) 10.4
    (iii) 0.0460
    (iv) 2810

    Q20 :The following data are obtained when dinitrogen and dioxygen react together to form different compounds:
    Mass of dinitrogen    Mass of dioxygen
    (i) 14 g                             16 g
    (ii) 14 g                            32 g
    (iii) 28 g                           32 g
    (iv) 28 g                           80 g
    (a) Which law of chemical combination is obeyed by the above experimental data?Give its statement.
    (b) Fill in the blanks in the following conversions:
    (i) 1 km = …………………. mm = …………………. pm
    (ii) 1 mg = …………………. kg = …………………. ng
    (iii) 1 mL = …………………. L = …………………. dm3
    Answer :
    (a) If we fix the mass of dinitrogen at 28 g, then the masses of dioxygen that will combine with the fixed mass of dinitrogen are 32 g, 64 g, 32 g, and 80 g.
    The masses of dioxygen bear a whole number ratio of 1:2:2:5. Hence, the given experimental data obeys the law of multiple proportions. The law states that if two elements combine to form more than one compound, then the masses of one element that combines with the fixed mass of another element are in the ratio of small whole numbers.
    (b) (i) 1 km = 1 km × 
    1 km = 106 mm
    1 km = 1 km × 
    1 km = 1015 pm
    Hence, 1 km = 106 mm = 1015 pm
    (ii) 1 mg = 1 mg × 
    ⇒ 1 mg = 10-6 kg
    1 mg = 1 mg ×  

    ⇒ 1 mg = 106 ng
    1 mg = 10-6 kg = 106 ng
    (iii) 1 mL = 1 mL × 
    ⇒ 1 mL = 10-3 L
    1 mL = 1 cm3 = 1 cm3 
    ⇒ 1 mL = 10-3 dm3
    1 mL = 10-3 L = 10-3 dm3

    Q21 :What is the concentration of sugar (C12H22O11) in mol L-1if its 20 g are dissolved in enough water to make a final volume up to 2 L?
    Answer :
    Molarity (M) of a solution is given by,

    = 0.02925 mol L-1
    Molar concentration of sugar = 0.02925 mol L-1

    Q22 :If the speed of light is 3.0 x 108 m s-1, calculate the distance covered by light in 2.00 ns.
    Answer :
    According to the question:
    Time taken to cover the distance = 2.00 ns
    = 2.00 x 10-9 s
    Speed of light = 3.0 x 108 ms-1
    Distance travelled by light in 2.00 ns
    = Speed of light x Time taken
    = (3.0 x 108 ms -1) (2.00 x 10-9 s)
    = 6.00 x 10-1 m
    = 0.600 m

    Q23 :In a reaction
    A + B2 → AB2
    Identify the limiting reagent, if any, in the following reaction mixtures.
    (i) 300 atoms of A + 200 molecules of B
    (ii) 2 mol A + 3 mol B
    (iii) 100 atoms of A + 100 molecules of B
    (iv) 5 mol A + 2.5 mol B
    (v) 2.5 mol A + 5 mol B
    Answer :
    A limiting reagent determines the extent of a reaction. It is the reactant which is the first to get consumed during a reaction, thereby causing the reaction to stop and limiting the amount of products formed.
    (i) According to the given reaction, 1 atom of A reacts with 1 molecule of B. Thus, 200 molecules of B will react with 200 atoms of A, thereby leaving 100 atoms of A unused. Hence, B is the limiting reagent.
    (ii) According to the reaction, 1 mol of A reacts with 1 mol of B. Thus, 2 mol of A will react with only 2 mol of B. As a result, 1 mol of B will not be consumed. Hence, A is the limiting reagent.
    (iii) According to the given reaction, 1 atom of A combines with 1 molecule of B. Thus, all 100 atoms of A will combine with all 100 molecules of B. Hence, the mixture is stoichiometric where no limiting reagent is present.
    (iv) 1 mol of atom A combines with 1 mol of molecule B. Thus, 2.5 mol of B will combine with only 2.5 mol of A. As
    a result, 2.5 mol of A will be left as such. Hence, B is the limiting reagent.
    (v) According to the reaction, 1 mol of atom A combines with 1 mol of molecule B. Thus, 2.5 mol of A will combinewith only 2.5 mol of B and the remaining 2.5 mol of B will be left as such. Hence, A is the limiting reagent.

    Q24 :Dinitrogen and dihydrogen react with each other to produce ammonia accordingto the following chemical equation:
    N2(g)+ H2(g) → 2NH3(g)
    (i) Calculate the mass of ammonia produced if 2.00 x 103g dinitrogen reacts with 1.00 x 103g of dihydrogen.
    (ii) Will any of the two reactants remain unreacted?
    (iii) If yes, which one and what would be its mass?
    Answer :
    (i) Balancing the given chemical equation,

    From the equation, 1 mole (28 g) of dinitrogen reacts with 3 mole (6 g) of dihydrogen to give 2 mole (34 g) of ammonia.
    ⇒ 2.00 × 103 g of dinitrogen will react with dihydrogen i.e., 
    2.00 × 103 g of dinitrogen will react with 428.6 g of dihydrogen.
    Given,
    Amount of dihydrogen = 1.00 × 103 g
    Hence, N2 is the limiting reagent.
    28 g of N2 produces 34 g of NH3.
    Hence, mass of ammonia produced by 2000 g of N2 
    = 2428.57 g
    (ii) N2 is the limiting reagent and H2 is the excess reagent. Hence, H2 will remain unreacted.
    (iii) Mass of dihydrogen left unreacted = 1.00 × 103 g – 428.6 g
    = 571.4 g

    Q25 :How are 0.50 mol Na2CO3 and 0.50 M Na2CO3 different?
    Answer :
    Molar mass of Na2CO3 = (2 × 23) + 12.00 + (3× 16)
    = 106 g mol-1
    Now, 1 mole of Na2CO3 means 106 g of Na2CO3.
    0.5 mol of Na2CO3 
    = 53 g Na2CO3
    ⇒ 0.50 M of Na2CO3 = 0.50 mol/L Na2CO3
    Hence, 0.50 mol of Na2CO3 is present in 1 L of water or 53 g of Na2CO3 is present in 1 L of water.

    Q26 :If ten volumes of dihydrogen gas react with five volumes of dioxygen gas, how many volumes of water vapour would be produced?
    Answer :
    Reaction of dihydrogen with dioxygen can be written as:

    Now, two volumes of dihydrogen react with one volume of dihydrogen to produce two volumes of water vapour.
    Hence, ten volumes of dihydrogen will react with five volumes of dioxygen to produce ten volumes of water vapour.

    Q27 :Convert the following into basic units:
    (i) 28.7 pm
    (ii) 15.15 pm
    (iii) 25365 mg
    Answer :
    (i) 28.7 pm:
    1 pm = 10-12 m
    28.7 pm = 28.7 × 10-12 m
    = 2.87 × 10-11 m
    (ii) 15.15 pm:
    1 pm = 10-12 m
    15.15 pm = 15.15 × 10-12 m
    = 1.515 × 10-11 m
    (iii) 25365 mg:
    1 mg = 10-3 g
    25365 mg = 2.5365 × 104 × 10-3 g
    Since,
    1 g = 10-3 kg
    2.5365 × 101 g = 2.5365 × 101 × 10-3 kg
    25365 mg = 2.5365 × 10-2 kg

    Q28 :Which one of the following will have largest number of atoms?
    (i) 1 g Au (s)
    (ii) 1 g Na (s)
    (iii) 1 g Li (s)
    (iv) 1 g of Cl2(g)
    Answer :
    1 g of Au (s)  mol of Au (s)
    atoms of Au (s)
    = 3.06 × 1021atoms of Au (s)

    1 g of Na (s) = mol of Na (s)
    atoms of Na (s)
    = 0.262 × 1023 atoms of Na (s)
    = 26.2 × 1021 atoms of Na (s)

    1 g of Li (s)  mol of Li (s)
     atoms of Li (s)
    = 0.86 × 1023 atoms of Li (s)
    = 86.0 × 1021 atoms of Li (s)

    1 g of Cl2 (g)  mol of Cl2 (g)
    (Molar mass of Cl2 molecule = 35.5 × 2 = 71 g mol-1)
     molecules of Cl2 (g)
    = 0.0848 × 1023 molecules of Cl2 (g)
    = 8.48 × 1021 molecules of Cl2 (g)
    As one molecule of Cl2 contains two atoms of Cl.
    Number of atoms of Cl = 2× 8.48 × 1021 =16.96 × 1021 atoms of Cl
    Hence, 1 g of Li (s) will have the largest number of atoms.

    Q29 :Calculate the molarity of a solution of ethanol in water in which the mole fraction of ethanol is 0.040 (assume the density of water to be one).
    Answer :
    Mole fraction of C2H5OH 

    Number of moles present in 1 L water:

    Substituting the value of  in equation (1),


    Molarity of solution 
    = 2.314 M

    Q30 :What will be the mass of one 12C atom in g?
    Answer :
    1 mole of carbon atoms = 6.023 × 1023 atoms of carbon
    = 12 g of carbon
    Mass of one 12C atom
    = 1.993 × 10-23 g

    Q31 :How many significant figures should be present in the answer of the following calculations?
    (i)
    (ii) 5 × 5.364
    (iii) 0.0125 + 0.7864 + 0.0215
    Answer :
    (i)
    Least precise number of calculation = 0.112
    Number of significant figures in the answer
    = Number of significant figures in the least precise number
    = 3
    (ii) 5 × 5.364
    Least precise number of calculation = 5.364
    Number of significant figures in the answer = Number of significant figures in 5.364
    = 4
    (iii) 0.0125 + 0.7864 + 0.0215
    Since the least number of decimal places in each term is four, the number of significant figures in the answer is
    also 4.

    Q32 :Use the data given in the following table to calculate the molar mass of naturally occurring argon isotopes:

    Isotope Isotopic molar mass Abundance
    36Ar 35.96755 gmol-1 0.337%
    38Ar 37.96272 gmol-1 0.063%
    40Ar 39.9624 gmol-1 99.600%

    Answer :
    Molar mass of argon

    = 39.947 gmol-1

    Q33 :Calculate the number of atoms in each of the following (i) 52 moles of Ar (ii) 52 u of He (iii) 52 g of He.
    Answer :
    (i) 1 mole of Ar = 6.022 × 1023 atoms of Ar
    52 mol of Ar = 52 × 6.022 × 1023 atoms of Ar
    = 3.131 × 1025 atoms of Ar
    (ii) 1 atom of He = 4 u of He
    Or,
    4 u of He = 1 atom of He
    1 u of He  atom of He
    52u of He atom of He
    = 13 atoms of He
    (iii) 4 g of He = 6.022 × 1023 atoms of He
    52 g of He atoms of He
    = 7.8286 × 1024 atoms of He

    Q34 :A welding fuel gas contains carbon and hydrogen only. Burning a small sample of it in oxygen gives 3.38 g carbon dioxide, 0.690 g of water and no other products. A volume of 10.0 L (measured at STP) of this welding gas is found to weigh 11.6 g. Calculate
    (i) empirical formula,
    (ii) molar mass of the gas, and
    (iii) molecular formula.
    Answer :
    (i) 1 mole (44 g) of CO2 contains 12 g of carbon.
    3.38 g of CO2 will contain carbon 
    = 0.9217 g

    18 g of water contains 2 g of hydrogen.
    0.690 g of water will contain hydrogen 
    = 0.0767 g
    Since carbon and hydrogen are the only constituents of the compound, the total mass of the compound is:
    = 0.9217 g + 0.0767 g
    = 0.9984 g

    Percent of C in the compound 
    = 92.32%

    Percent of H in the compound 
    = 7.68%

    Moles of carbon in the compound 
    = 7.69
    Moles of hydrogen in the compound =
    = 7.68
    Ratio of carbon to hydrogen in the compound = 7.69: 7.68
    = 1: 1
    Hence, the empirical formula of the gas is CH.
    (ii) Given,
    Weight of 10.0L of the gas (at S.T.P) = 11.6 g
    Weight of 22.4 L of gas at STP 
    = 25.984 g
    ≈ 26 g
    Hence, the molar mass of the gas is 26 g.
    (iii) Empirical formula mass of CH = 12 + 1 = 13 g

    n = 2
    Molecular formula of gas = (CH)n
    = C2H2

    Q35 :Calcium carbonate reacts with aqueous HCl to give CaCl2 and CO2 according to the reaction, CaCO3(s) + 2 HCl(aq) → CaCl2(aq) + CO2(g) + H2O(l)
    What mass of CaCO3 is required to react completely with 25 mL of 0.75 M HCl?
    Answer :
    0.75 M of HCl ≡ 0.75 mol of HCl are present in 1 L of water
    ≡ [(0.75 mol) × (36.5 g mol–1)] HCl is present in 1 L of water
    ≡ 27.375 g of HCl is present in 1 L of water
    Thus, 1000 mL of solution contains 27.375 g of HCl.
    Amount of HCl present in 25 mL of solution

    = 0.6844 g
    From the given chemical equation,

    2 mol of HCl (2 × 36.5 = 71 g) react with 1 mol of CaCO3 (100 g).
    Amount of CaCO3 that will react with 0.6844 g
    = 0.9639 g

    Q36 :Chlorine is prepared in the laboratory by treating manganese dioxide (MnO2) with aqueous hydrochloric acid according to the reaction
    4HCl(aq) + MnO2(s) → 2H2O(l) + MnCl2(aq) + Cl2(g)
    How many grams of HCl react with 5.0 g of manganese dioxide?
    Answer :
    1 mol [55 + 2 × 16 = 87 g] MnO2 reacts completely with 4 mol [4 × 36.5 = 146 g] of HCl.
    5.0 g of MnO2 will react with
    of HCl

    = 8.4 g of HCl
    Hence, 8.4 g of HCl will react completely with 5.0 g of manganese dioxide.

    Share.